What are the differences between normal and high speed cnc planar drilling machine?

The stability of cnc planar drilling machine directly affects the accuracy of the drilling machine, the input and the life of the machine tool, so the process of equipment can not be careless, 

and should be strictly required. Foundation leveling, use the level meter to investigate the height of the foundation pre-embedded plate, record the extra-high piece as a benchmark. 

Placement of the base, the two sides of the base will be placed on the foundation plate, measure the width of the bridge, the width of the interval between the two sides of the base should 

be wider than the bridge width of 5mm, in order to equipment over the bridge.

cnc plate drilling machine is mainly used for drilling and milling of plate workpieces in steel structure occupations such as construction, bridge, tower, etc. It can also be used for drilling and 

light milling of pipe plates, folding plates and round flanges in boiler and petrochemical occupations. cnc planar drilling machine is a structural way of absorbing domestic and foreign CNC 

drilling, milling and boring processing cores It is a new type of CNC product developed and planned by absorbing domestic and foreign CNC drilling, milling and boring core structure. The 

machine tool chooses the way that the table (planer table) is fixed and the gantry (crossbeam) is moved, which has good stability, compact structure and small footprint. The bed, guide rail 

and crossbeam are made of high quality cast iron and steel structural parts, especially the crossbeam and the drilling headstock, which are treated by heat treatment technology, are very 

stable and reliable, ensuring no deformation. Than the stability of similar products is much better. After many years of use in comparison, the effect is very obvious.

Equipment over the bridge, the left bridge installed on the sealing strip, and then the bridge equipment to the left base; the right side of the base over the top, connected to the end of the 

base of the equipment. So that the base will be the end of the equipment, equipment footboard and foundation embedded plate welded firmly. Equipment gantry, lift the gantry, the first 

side of the skateboard screws, positioning pins installed, by turning the screw to install the other side of the positioning pins, this side of the equipment should be very smooth and easy, the 

end of the gantry and skateboard equipment, the end of the screws fixed. According to the user's demand, a high-quality drilling head can be equipped on the crossbeam, which can move 

left and right, up and down. The drilling head selects the fine high-strength processing core spindle, not only high positioning accuracy, high speed (higher up to 6000rpm), its cutting force 

is very large. Can also accept strong overload processing, processing surface finish and shape and position of the public service is also very high, the machine can complete the four-axis 

linkage, the whole device has a strong flexibility.

It is suitable for drilling of various molds, flanges, pipe plates and other large plates, and it is also especially suitable for drilling, milling grooves, milling small flat surfaces, tapping and 

other processes in the circumferential direction (on the shaft) of various kinds of reversing supports, wind power flanges, or large modulus internal and external gears. The whole production 

line has the functions of automatic loading, end face cutting, positioning, clamping, drilling, tapping and total length cutting.