Storage rack is widely applied in storage and logistic industry. Our roll forming machine can continuously and automatically produce the racks. Meanwhile, the industry is developing, more and more customized parts from storage and logistic industry can be produced from roll forming machines.
mm
KN
m/min
Storage rack is widely applied in storage and logistic industry. Our roll forming machine can continuously and automatically produce the racks. Meanwhile, the industry is developing, more and more customized parts from storage and logistic industry can be produced from roll forming machines.
Manufacturing Processes:
Transmission mode: Main motor → Gear reducer → Drive bevel gear box → Clutch → Lower roller shaft of the archway.
This equipment is mainly used for storage shelves, supermarket shelves, home shelves production, etc;This production line has the characteristics of high degree of automation, high efficiency, good stability, etc.; it has been used by many users in China and has won good customer reviews. The automatic production line of high-speed racking columns adopts fully automatic control, which greatly improves production efficiency and reduces labor intensity.
Parameters:
Configurations | 3T Manual Uncoiler(2 SETS), Roll Forming, Electric-Motor, Mould Cutting, hydraulic station, Control Cabinet |
Control System | Automatic Colored Touch ScreenDelta brand PLC Inverter |
Main Power | 7.5 KW |
Pump Power | 4 KW |
Power Supply | 380V, 3-Phase, 50Hz |
Forming Speed | 8-10 m/min |
Roll Station | 17 roller station |
Shaft Diameter | 57mm |
Feeding Thickness | 1.8mm |
Overall Size | About 7200×1200×1500mm |
Total Weight | Approximately 3600KGS |
The roller frame adopts an integral structure and is finished with precision processing. The distance between the upper and lower rollers is adjusted by the eccentric sleeve on the roller shaft. The locking device guarantees that the equipment is undecided. The upper and lower roller bearings are lubricated.
Long machine life, all of our machines can be used stable performance for more than 10-15 year, while other small and low quality supplier's machine only can be used for 1-2 years.
The casting arch is installed on the frame, and the distance is adjusted by rotating the screw. The forming machine uses a three-phase AC motor to drive the main reducer, which is installed in the middle of the forming machine. Drive the transmission box to drive in series, and the power is transmitted to the upper and lower shafts of the forming unit through the clutch. Necessary passes are equipped with upper and lower synchronization gears.
Copyright © Shandong Raintech Group All Rights Reserved. | Privacy Policy | Powed by Yandex