electricity tower steel punch cutting machine
CNC L steel cutting punch marking machine
Automatic angle steel tower machine
CNC Punching Marking Shearing Line for Angle Steel
Cnc Angle Steel Punching Marking Production Line
JGX Series CNC Angle Punching Shearing Marking Machine
Cnc Angle Steel Punching Cutting Machine For High Voltage Tower
Cnc Angle Punching Machine For Transmission Tower
CNC Punching machine
mm
KN
m/min
cnc punching machine for angle steel can punch and cut angles by very simple program operation. It is also possible to set the length of the finished piece directly through CNC operation, achieving complete automation. It also has a self-diagnostic function to save repair time.
The production line is applicable for marking punching and shearing of angle steel in th efields of electric power,commuincatons,steel structure,photovoltaic brackets,etc.
Model | JGX1516/S | |
Function | CNC Punching,Marking,Shearing line for Angle steel | |
Processing area | Minimum angle length(mm) | 40*40*3 |
Maximum angle length(mm) | 150*150*12/16 | |
Maximum angle length(m) | 12 | |
punching | Punching force | 1500 |
Nmuber of punches per side | 3 | |
Max.punching hole size | 26 | |
22x50 | ||
Adjustment range | 20-140 | |
Marking Force(KN) | Marking Force | 800 |
Group of marking characters | 4 | |
Qty of marking characters | 12 | |
Character size | 14 x10x19 | |
Shear | Shear nominal force(KN) | 1800/4000 |
Shear mode | Double/single | |
CNC axis number | 3 | |
Feeding speed(m/min) | 30-80 | |
Feeding mode | Servo infeeding | |
Programming accuracy | Reunie with GB2694-2010 | |
Programming mode | AUTO CAD(NC, Dxf) OR Sample software | |
Program function | Real-time monitoring,fault display,fault display,fault alarm,etc. | |
Overall size(m) | 28X7X2.6 |
The machine adopts our own self-developed Taurus software can be used when the device is turned on, and stopped when it is turned off, and it does not need to return to the original point when it is restarted. It can achieve continuous work ,greatly improve the working efficiency.
Marking unit adopt closed frame with good rigidity,four groups of character boxes are fixed in the marking unit which can be selected by program,each with up to 12 characters
The machine's shear unit body adopts a double blades gantry frame type body, and the tool guide part adopts a wear-resistant copper plate. When cutting materials of different thicknesses, the gap between the cutters can be adjusted by adding or subtracting pad blades to always maintain good cutting quality.
Copyright © Shandong Raintech Group All Rights Reserved. | Privacy Policy | Powed by Yandex