3 Waves Highway Road Crash Barrier Guardrail Roll Forming Machine

3 Waves Highway Road Crash Barrier Guardrail Roll Forming Machine

Roll forming lines

Overview

highway guardrail roll forming machine

three wave guardrail roll forming machine

highway guardrail roll forming machine

three wave beam roll forming production line

thrie wave beam highway guardrail roll forming machine manufacturer

  • Max. Strips width:

    750 mm

    mm

  • Uncoiler motor power:

    ≈5.5kw(according the final design)

    KN

  • Line speed

    4 pcs/min(Length4320mm)

    m/min

introduction

Highway guardrail roll forming machine is mainly used to produce highway guardrail. This machine used for punching, forming and cutting of the highway guardrail corrugated plate, which widely used in bridge, highway construction.

微信图片_20201211142305.jpg

Working Process

Uncoiling → Servo leveling and feeding → 500T punching & cutting machine + punching and reinforced hole press → pinch feeder → transition material conveyor→ roll forming main process → Electromagnetic automatic palletizing machine.


Raintech High Speed Waveform Guardrail Barrier Plate Roll Forming Machine

MAIN COMPONENTS


1.Uncoiler         
The machine is a single-head mode. With single support, the motor drives the material shaft of the uncoiler to release the material roll, and the hydraulic power drives the tension device of the material shaft of the uncoiler to fix the material roll on the material shaft of the uncoiler.


2. Material Storage Device
The storage device is composed of two parts: the arc-shaped roller and the supporting device. There are four groups of arc-shaped rollers. Between the two storage bins, they are composed of an arc frame and a single rotating roller. A photoelectric switch is installed in the pit of the silo to control the position of the roll entering the pit, so that the speed of each working part can be perfectly matched.


3. Leveling Servo Feeder
The sheet is fed in according to the actual step length required for punching, and multiple sets of feeding parameters can be set at one time, which is convenient and quick. The feeding accuracy is accurate without accumulated tolerance.


4.Pneumatic follow-up shearing
It cuts the formed parts to a fixed length. The whole working process does not need to stop the whole line, and it automatically tracks and cuts, which is fast and efficient.


Application

This machine used for punching, forming and cutting of the highway guardrail corrugated plate, which widely used in bridge, highway construction, Power Culvert , highway culvert , infrastructure construction etc.

高速护拦板应用图.png

Technical Data

Material:   Cold rolled mild steel
Raw material yield strength235-355Mpa
Tensile strength of raw materials 420-550Mpa
Coils OD ≤Ф1600 mm
Coils IDФ508mm
Strips width ≤750mm
Strips thickness2.3-3mm
Coils weight≤10000 kg
Line speed4 pcs/min(Length4320mm)


Workpiece

Features

Uncoiler

The machine is a single-head mode. With single support, the motor drives the material shaft of the uncoiler to release the material roll, and the hydraulic power drives the tension device of the material shaft of the uncoiler to fix the material roll on the material shaft of the uncoiler.

Uncoiler

Leveling Servo Feeder

The sheet is fed in according to the actual step length required for punching, and multiple sets of feeding parameters can be set at one time, which is convenient and quick. The feeding accuracy is accurate without accumulated tolerance.

Leveling Servo Feeder

Material Storage Device

The storage device is composed of two parts: the arc-shaped roller and the supporting device. There are four groups of arc-shaped rollers. Between the two storage bins, they are composed of an arc frame and a single rotating roller. A photoelectric switch is installed in the pit of the silo to control the position of the roll entering the pit, so that the speed of each working part can be perfectly matched.

Material Storage Device

Recommend Related Products

Need Help?

Start Your Most Profitable Partnership Today!