About the efficiency of CNC Planar Drilling machines

CNC Planar Drilling Machine has a total of 3 CNC axes. The bed body and the gantry content are equipped with heavy linear guide rails. The working table can move longitudinally-along 

the guide rails (x axis), and the slide plate can move horizontally along the guide rails (y axis). The power head can move in a straight direction in the slide (z axis), and the x, y and z axes are 

driven by servo motors and ball screws. According to the width of the work table, there are two driving methods: single-side drive and double-side synchronous drive of the gantry. 

The double-side synchronous drive of the gantry is mainly used to process the workpiece with an effective workpiece width greater than 1600mm, which not only deals with the problem of 

partial load of the large-span gantry drive, but also ensures the synchronous movement of the machine tool's x axis.

Use CNC Planar Drilling Machine to prevent excessive force during the initial drilling and when the hole is about to be opened. In order to avoid drilling the workbench or vice, it is necessary 

to add a pad under the workpiece, and use a mechanical feed to drill through the hole when it is about to drill through, it is necessary to use a manual feed. Check the active lubrication 

system of the flat drilling machine on time to ensure the normal operation of all parts of the machine.

When the plate drilling machine is not used for a long time, attention should be paid to maintenance, and the operation can be properly started. Check the hydraulic system of the plate 

drilling machine, electrical components, check the circuit board and other clean on time. The brush and commutator of the plate drilling machine should be checked in time. The storage 

device has a dedicated battery protection circuit. To ensure the normal operation of the system without power, the battery should be fully charged. CNC Planar Drilling Machine is a versatile 

machine tool with a wide range of uses, which can drill, reaming, reaming, counterfacing and tapping parts. When the radial drilling machine is equipped with process equipment, it can also

 be boring; It is equipped with multi-function operation table on the bench drill, and the keyway can also be milling. It can be used for steel structure, iron tower, iron beam, mechanical 

processing and other work.

CNC Planar Drilling Machine is mainly used for drilling, reaming, reaming, tapping and other processing. When milling the surface after drilling, it is forbidden to use the mechanical feed, 

and the hand wheel milling should be scheduled by manual method. In addition, with the rod drill, the method of frequent cutting should be used when drilling deep holes. When 

disconnecting bits, cheek drill sleeves and other accessories, use a standard wedge iron punch or a drill clamp wrench to loosen, and do not hit with anything. CNC Planar Drilling Machine is 

a machining Machine often used in mechanical engineering, which can be regarded as a large piece. In the process of operation, we must follow the rules. Here, we will explain the operation 

of CNC Planar Drilling Machine. Hold it in place on a workbench or vise. Work in cars, locomotives, shipbuilding, aerospace, engineering machinery; In particular, the drilling process of 

various large parts of the porous system such as ultra-long laminated plates, longitudinal beams, structural steel and pipe parts should be given priority.