Introduction to cnc planar drilling machine

The CNC plate drilling machine has three CNC axes. The bed and gantry are equipped with heavy-duty linear guides. The worktable can move longitudinally along the guide rails (x-axis),

 and the slide plate can move transversely along the guide rails (y-axis). There is a slider on the top, and a guide rail on the power head. The power head can move in the straight direction

 (z-axis) on the slide. The x, y, and z axes are all driven by servo motors and ball screws. According to the width of the workbench, there are two driving modes: gantry single-sided drive and 

gantry double-sided synchronous drive. Gantry double-sided synchronous drive is mainly used to process workpieces with an effective workpiece width greater than 1600mm, which not 

only solves the problem of unbalanced load of long-span gantry drives The problem also ensures the synchronous movement of the x-axis of the machine tool.

When using a CNC planar drilling machine, do not use excessive force when starting to drill or when the hole is about to be drilled. In order to avoid damaging the workbench or vise by 

drilling, a pad should be added under the workpiece. When the through hole is almost drilled through with motorized feed, manual feed should be used instead. Regularly check the 

automatic lubrication system of the CNC plate drilling machine to ensure the normal operation of all parts of the machine. When the CNC planar drilling machine is not used for a long time, 

you should pay attention to maintenance and start it up and run it appropriately. Check the hydraulic system of the CNC planar drilling machine regularly. Regularly check the electrical 

components of the CNC planar drilling machine, such as plugs, sockets, etc., and check whether the circuit boards are clean. The brushes and commutator of the CNC planar drilling machine 

should be checked regularly. Storage devices have dedicated battery maintenance circuits. To ensure that the system works normally without power, the battery should be fully charged. 

Check the mechanical accuracy of the CNC planar drilling machine regularly. It is necessary to clean it regularly. The CNC planar drilling machine is a versatile machine tool with a wide range 

of uses. It can drill, expand, ream, countersink and tap threads on parts. When the radial drilling machine is equipped with process equipment, it can also be bored; when the bench drill is 

equipped with a multi-functional workbench, it can also mill keyways. It can be used in steel structures, iron towers, iron beams, mechanical processing and other industries.

CNC planar drilling machine is mainly used for drilling, reaming, reaming, tapping and other processing. When milling a plane after drilling, it is not allowed to use motorized feed, and 

handwheel milling must be adjusted manually. In addition, use a post drill bit and use frequent cutting methods when drilling deep holes. When disassembling drill bits, cheek drill sleeves 

and other accessories, use a standard wedge iron to punch or loosen them with a drill card wrench, and do not hit or hit them with anything. CNC planar drilling machine is a machining 

machine that is often used in mechanical engineering. It can be considered a large piece. You must follow the rules during the operation. Here, the editor will explain to you the operation 

of CNC planar drilling. It is not allowed to use When drilling holes with the workpiece in hand, clamp it on the workbench or vise. In the automobile, motorcycle, shipbuilding, aerospace, 

and engineering machinery industries; especially for drilling and processing of various large parts of porous systems such as extra-long stacked plates, longitudinal beams, structural steel, 

and tubular parts, etc.