U steel Marking Punching and Cutting Machine
U steel iron punching shearing production line
Channel Steel hole punching and Cutting Machine
Water Cooling
2200KN Shearing Force
1000KN Punching Force
800KN Marking Force
Mitsubishi PLC controller
Panasonic Servo Motor
Lenovo Computer
ATOS Valve Block
Model:UL1612
Function:Punching, Marking, Shearing
Processing Range
Channel steel:80*40*4.5mm - 160*80*10mm
mm
KN
m/min
UL1612 is a Channel steel Punching Shearing and Marking machine with a processing range of 80*40*4.5mm -160*80*10mm
This channel steel processing line used widely in steel structure, racks, construction, steel towers and railway industries etc.
This channel steel processing line used widely in steel structure, racks, construction, steel towers and railway industries etc.
Model | UL1612 | |
Function | Punching, Marking, Shearing for channel steel | |
Channel steel | 80*40*4.5mm -160*80*10mm | |
Max. Punching Diameter*Thickness(mm)
| Round hole on web |
Φ22 |
Slot hole on web | 22*50 | |
Round hole on flange | Φ18 | |
Slot hole on flange | 18*50 | |
Punching Force (KN) | 1000 | |
Marking Force(KN) | 800 | |
Shearing Force(KN) | 2200 | |
Max. Length of Blank | 12m | |
Max. Length of finished products(m) | 9 | |
Stadia Adjusting Range(mm) | 20-120 | |
Punching sides | 3 | |
Punching Dies Number on Each Side | 3 | |
Punching position | Any position | |
Marking Stations | 2 | |
Marking Character Size | 14*10*19 | |
Character No. | 12 | |
CNC Axis number | 4 | |
Hydraulic pressure | 25MPa | |
Max. infeed speed(m/min.) | 60 | |
Punching frequency | 40-45punch/min. | |
Programming | AUTO CAD OR Sample software | |
Total power | 30KW | |
Precision | ±1% | |
Cooling | Water cooling | |
Pneumatic pressure | 0.8Mpa | |
Net Weight | 14500kg | |
Overall size(mm) | 25*5*2.2 |
The motor and reducer drive through the sprocket and chain, through three long shafts and six self-made couplings to realize the synchronization of four chains with dial blocks. This makes the channel steel in the process of transportation smooth, small noise. The function of this part is to transport the channel steel to the set position to be picked up by the material claw.
The CNC feeding cart driven by servo motor, made up with drive gear, synchronous belt, car frame body, clamping pliers and other components The infeeding conveyor and the CNC feeding cart are inseparable. At work, the numerical control car to promote the material on the material passage forward into, the raw material into the main machine for punching operations
There are 4 sets of cylinders through the lateral push, the blank of a side against the side of the tight material passage positioning
This part has three punching stations, and the corresponding pressing part, can achieve channel steel webs three kinds of aperture punching plus two station typing and 2 wing plate three kinds of aperture punching
Copyright © Shandong Raintech Group All Rights Reserved. | Privacy Policy | Powed by Yandex