steel coil slitting line
slitting line
automatic slitting line
coil slitting line
steel coil slitting line
high speed slitting line
slitting machine line
steel slitting machine
mm
KN
m/min
Raintech slitting line is mainly used for slitting and cutting coil materials such as tinplate, galvanized iron, silicon steel sheet, cold rolled steel strip, stainless steel strip, aluminum strip, and steel strip. It cuts metal coils into strips of various widths, and then harvests the strips into small coils for use in the next process. It is a necessary equipment for precision cutting of metal strips in the transformer, motor industry and other metal strips.According to the thickness of the slitting plate, it is divided into thin plate slitting line and thick plate slitting line.
Work Processing:
Coil Preparation→Roll-up → Uncoiling → Taking → Pinch→hydraulic shear→loop brige→ rectifying → slitting machine→Scrap Winder→ loop bridge→Tail press→ separate shaft→tension 1#→Tension 2#→press bur rollers → hydraulic shear→Swerve feeding mechanism→ press→ recoiling →discharge
The slitting line is also called slitting unit, slitting machine, slitting machine, and scissors. It cuts the metal coils into strips of various required widths, and then collects the strips into small rolls for the next process. It is a necessary equipment for precision cutting of transformers, motor industries and other metal strips.
Technical Parameter:
NO | Parameter name | Value |
01 | Plate material | CR Steel & HR Steel( YS.≤ 250MPa, TS.≤ 450MPa) |
02 | Width | 700mm~ 2000mm |
03 | Thickness | 0.5mm~ 4.0mm |
04 | Outer diameter | Φ 1000mm~Φ 2000mm |
05 | Inner diameter | Φ 508mm,Φ 610mm,Φ 760mm |
06 | Plate weight | Max.35000Kg |
07 | Strip slitting capacity | Max 25 strip( thickness of plating 2.0mm) Max.12 strip( thickness of plating 3.0mm) Max.8 strip( thickness of plating4.0mm) |
08 | Rewinding ID | Φ610mm |
09 | Rewinding ID | Φ1000mm~Φ2000mm |
10 | Rewinding Weight | Max.35000Kg |
11 | Design speed | Max.120m/min |
12 | Power | Triphase AC 380V,50Hz |
13 | Operating Environment | Ambient temperature:-10ºC~45ºC Relative Humidity:≤80% |
Composition of Production Line:
NO. | Equipment name | Quantity | Unit |
1 | steel coil saddle | 1 | Set |
2 | entry car | 1 | Set |
3 | Double head uncoiler | 1 | Set |
4 | taking device | 1 | Set |
5 | Guiding machine | 1 | Set |
6 | Hydraulic shear | 1 | Set |
7 | Looping bridge | 1 | Set |
8 | rectify device | 1 | Set |
9 | slitting machine | 1 | Set |
10 | Scrap winder | 1 | Set |
11 | Looping bridge+end press | 1 | Set |
12 | Separating and tension device | 1 | Set |
13 | Tension 2# | 1 | Set |
14 | Press-bur rollers | 1 | Set |
15 | hydraulic shear | 1 | Set |
16 | Swerve feeding mechanism | 1 | Set |
17 | recoiler+Separating | 1 | Set |
18 | The unloading cart | 1 | Set |
19 | hydraulic system | 1 | Set |
20 | pneumatic system | 1 | Set |
21 | electrical control system | 1 | Set |
22 | Accessories: Slitting knives, spacer | 0 | Set |
It is composed of heavy duty fuselage, expansion and contraction spindle, heavy duty sliding seat, power system and braking device. The front and rear shaft ends of the spindle are supported by heavy bearing movement, and the rear of the spindle is equipped with a brake disc to prevent inertia rotation of the steel coil.
Mechanical Composition: Consist of V-shaped frame structure welded by a steel plate, the anchor bolt is fixed symmetrically by left and right, installed at the foremost end of the entire production line;
Copyright © Shandong Raintech Group All Rights Reserved. | Privacy Policy | Powed by Yandex