High Performance 50MM 80MM Plate W12 8X2000 Rolling Machine Manufacturers

High Performance 50MM 80MM Plate W12 8X2000 Rolling Machine Manufacturers

Plate Rolling Machine

Overview

Plate Rolling Machine

Metal Sheet Processing Machine

Hydraulic Plate Rolling Machine

Four-roller plate rolling Machine

Maximum thickness of rolling plate 20mm

Maximum thickness of prebent plate 16mm

Maximum roll plate width 2000mm

Work roller drive form Upper roller hydraulic motor drive

Main electrical components SIEMENS

Touch screen SIEMENS

PLC Programmable controller SIEMENS

Model:W12-20×2000

Metal Processed Material:Aluminum Carbon steel Brass / Copper


  • mm

  • KN

  • m/min

introduction

Four-rolling machine plate rolling machine is a special forging machine that can bend non-metallic plates into cones, spheres, cylinders or other shapes. The four-roller plate rolling machine can complete the pre-bending and rolling of the end of the metal plate without turning around the metal plate at one time, and the remaining straight edge is small. It is an ideal equipment for rolling round, arc, and tapered workpieces. W12CNC series four-roll plate rolling machine is a heavy-duty NC plate rolling machine with international advanced technology, programmable digital control by PLC, and full hydraulic drive to realize automatic rolling. It is an ideal equipment for rolling multi-section arc, square, round, tapered and heterosexual workpieces.

rolling plate machine-05

Application

This machine is suitable for the bending and forming of metal sheets. It can roll round, arc and conical workpieces within a certain range. It also has the function of pre-bending the end of the sheet. The remaining straight edges are small and the work efficiency is high. It can be used in this Rough leveling of sheet metal on the machine. This performance is widely used in manufacturing, boiler steam, chemical industry, non-metallic structure and machine building and other industries.


Technical Data



No.


Model

Parameter


Unit


1.


Diameter of upper roll

Φ300


mm


2.


Lower roll diameter

Φ280


mm


3.


Diameter of side roll

Φ230


mm


4.


Maximum thickness of rolling plate

20


mm


5.


Maximum thickness of prebent plate

16


mm


6.


Maximum roll plate width

2000


mm


7.


Work roller drive form

Upper roller hydraulic motor drive

 


8.


Sheet yield limit

≤245Mpa


Mpa


9.


Speed of winding

About 4


m/min


10.


Full load minimum drum diameter

Φ600


mm


11.


Total power of equipment

15


KW

Workpiece

Features

1. Full hydraulic drive, high efficiency and energy saving (the driving power is equivalent to 60% of the traditional one), and the rolling work is safer and more reliable than other types of plate rolling machines.

2. Permanent lubrication technology (no need to refuel during the bearing life)

3. The clamping pressure is adjustable (there is no slippage, and the productivity is 50%-80% higher than that of the three-roll plate bending machine). The clamping force of the plate between the upper and lower rolls can be adjusted through the pressure regulating valve of the hydraulic station. The corresponding required pressure when the thickness and width sheet is rolled.

4. It can roll a cylinder with a diameter of 1.3 times that of the upper roll, and the length of the straight edge when the end of the rolled plate is pre-bent is smaller than that of other types of plate rolling machines.

Recommend Related Products

Need Help?

Start Your Most Profitable Partnership Today!