Plate Rolling Machine
Metal Sheet Processing Machine
Hydraulic Plate Rolling Machine
Four-roller plate rolling Machine
Maximum thickness of rolling plate 20mm
Maximum thickness of prebent plate 16mm
Maximum roll plate width 2000mm
Work roller drive form Upper roller hydraulic motor drive
Main electrical components SIEMENS
Touch screen SIEMENS
PLC Programmable controller SIEMENS
Model:W12-20×2000
Metal Processed Material:Aluminum Carbon steel Brass / Copper
mm
KN
m/min
Four-rolling machine plate rolling machine is a special forging machine that can bend non-metallic plates into cones, spheres, cylinders or other shapes. The four-roller plate rolling machine can complete the pre-bending and rolling of the end of the metal plate without turning around the metal plate at one time, and the remaining straight edge is small. It is an ideal equipment for rolling round, arc, and tapered workpieces. W12CNC series four-roll plate rolling machine is a heavy-duty NC plate rolling machine with international advanced technology, programmable digital control by PLC, and full hydraulic drive to realize automatic rolling. It is an ideal equipment for rolling multi-section arc, square, round, tapered and heterosexual workpieces.
This machine is suitable for the bending and forming of metal sheets. It can roll round, arc and conical workpieces within a certain range. It also has the function of pre-bending the end of the sheet. The remaining straight edges are small and the work efficiency is high. It can be used in this Rough leveling of sheet metal on the machine. This performance is widely used in manufacturing, boiler steam, chemical industry, non-metallic structure and machine building and other industries.
No. | Model | Parameter | Unit |
1. | Diameter of upper roll | Φ300 | mm |
2. | Lower roll diameter | Φ280 | mm |
3. | Diameter of side roll | Φ230 | mm |
4. | Maximum thickness of rolling plate | 20 | mm |
5. | Maximum thickness of prebent plate | 16 | mm |
6. | Maximum roll plate width | 2000 | mm |
7. | Work roller drive form | Upper roller hydraulic motor drive |
|
8. | Sheet yield limit | ≤245Mpa | Mpa |
9. | Speed of winding | About 4 | m/min |
10. | Full load minimum drum diameter | Φ600 | mm |
11. | Total power of equipment | 15 | KW |
1. Full hydraulic drive, high efficiency and energy saving (the driving power is equivalent to 60% of the traditional one), and the rolling work is safer and more reliable than other types of plate rolling machines.
2. Permanent lubrication technology (no need to refuel during the bearing life)
3. The clamping pressure is adjustable (there is no slippage, and the productivity is 50%-80% higher than that of the three-roll plate bending machine). The clamping force of the plate between the upper and lower rolls can be adjusted through the pressure regulating valve of the hydraulic station. The corresponding required pressure when the thickness and width sheet is rolled.
4. It can roll a cylinder with a diameter of 1.3 times that of the upper roll, and the length of the straight edge when the end of the rolled plate is pre-bent is smaller than that of other types of plate rolling machines.
Copyright © Shandong Raintech Group All Rights Reserved. | Privacy Policy | Powed by Yandex