Solar Strut Roll forming machine

Solar Strut Roll forming machine

Roll forming lines

Overview

Solar Strut roll forming machine

Solar Rack roll forming machine

Solar Bracket roll forming machine

 roll forming machine

roll forming machine manufacturers

  • Strips thickness:

    1.5~2.5mm

    mm

  • Raw material yield strength:

    235Mpa

    KN

  • Maximum linear speed

    2~14m/min

    m/min

introduction

Process of the line
Uncoiler→leveler--- servo feeder→punching station→roll forming unit →hydraulic shear→finishedproducts

Main Components

1. Uncoiler 1 set

       The machine is in single head mode.The tensioning structure is connecting rod type, the working state is stable and reliable The uncoiler is equipped with pneumatic brake
 

2. Servo motor leveler and feeder 1 set

       Usage :According to the actual punching required step length into the sheet material, can set multiple feeding parameters at one time, convenient and fast.Accurate feeding accuracy without cumulative
 

3. Punching Unit 1 set

      Structure :Whole Frame welded hydraulic press, economical and applicable, fast speedThe hole spacing c an be adjusted in the transverse direction of the plate, and the step spacing can be changed through t he electrical control system
 

4. Roll forming machine 1set

Structure: The molding unit adopts independent stand ( archway stands mode).Motor, reducer drive, chain  d riven type
Parameters:Archway stands : 20 sets
Forming shaft: φ70mm(according to final drawing)
Motor power:approx..22KW(according to final drawing )
Max. line speed:5~15m/min


Solar Bracket roll forming machine

 

Application

This Solar Strut roll forming machine can achieve high efficiency punching&roll forming of the solar strut channel,which widely used for solar mounting structure industry.

solar strut channel application (2).jpg

Technical Data

Technical Parameter

ConfigurationsManual Uncoiler, Roll Forming, Electric-Motor, Mould Cutting, hydraulic station, Control Cabinet
Control SystemAutomatic Colored Touch Screen
Delta brand PLC Inverter
Maximum allowable feeding width≤300
Allowable feeding thickness
 
≤2mm
Single feeding error
 
≤±0.2mm (this tolerance does not add up)
Servo motor brand
 
YASKAWA, Japan
Servo motor power
 
9Cr2Mo(or GCr15), hardness HRC55-60
Molding passes
 
15 passes (subject to final design)
Axle diameter of molding machine
 
φ60mm (subject to final design)
Motor power
 
22KW Siemens Bede frequency conversion motor
Maximum linear speed
 
2~14m/min


Workpiece

Features

higher hardness and wear resistance

All of the machine main body and parts are quenched, with higher hardness(HRC58-62) and wear resistance, while other suppliers only rough steel welded.

higher hardness and wear resistance

individual archway stands for rollers station

We adopts individual archway stands for rollers station, more strong and rigidity structure than other suppliers

individual archway stands for rollers station

Long machine life

Long machine life, all of our machines can be used stable performance for more than 10-15 year, while other small and low quality supplier's machine only can be used for 1-2 years.

Long machine life

Recommend Related Products

Need Help?

Start Your Most Profitable Partnership Today!